| PFC
APPROVED PROCESSESS Last Update: 12/01/99 |
||||
|
Manuf.
|
Description
|
Process
#
|
||
| Lockheed Martin | PFC-MMC-34 - Fabrication of Epoxy Laminates |
STP-1517
|
||
| PFC-MMC-41 (Inactive) - Rivets, Installation of |
STP-2001
|
|||
| PFC-MMC-40 - Rivets, Blind, Mechanically Expanded, Installation |
STP-2002
|
|||
| PFC-MMC-39 - Countersinking & Flushness Requirements for 100 Degree Fasteners |
STP-2003
|
|||
| PFC-MMC-25 - Bolts, Screws, and Nuts, Installation of |
STP-2014
|
|||
| PFC-MMC-55 - Screw Threads, Inserts and Studs, Key Locked, Installation and Removal of |
STP-2024
|
|||
| PFC-MMC-80 - Heat Treatment of Aluminum Alloy Rivets |
STP-2028
|
|||
| PFC-MMC-33 (Touch up only) - Epoxy Painting |
STP-3003
|
|||
| PFC-MMC-32 (Touch up only) - Chemical Film for Aluminum and Aluminum Alloys |
STP-3001
|
|||
| PFC-MMC-26 - Identification and Marking of Details and Assemblies |
STP-4501
|
|||
| PFC-MMC-27 - Preservation & Packaging |
STP-4502
|
|||
| PFC-MMC-58 - Solvent Clean - Flush or Wipe |
STP-5002
|
|||
| PFC-MMC-28 (Methods 3,4, & 5 only) - Surface Preparation for Adhesive Bonding Methods |
STP-5013
|
|||
| PFC-MMC-29 (Type I & II) - Adhesive Bonding, General Purpose |
STP-6001
|
|||
| PFC-MMC-54 - Thermal Isolator Installation with Mounting Tape |
STP-6009
|
|||
| PFC-MMC-56 - Electrical and Electrical Bonding Connections |
STP-6511
|
|||
| PFC-MMC-81- Sealing Welded Clips |
STP-7001
|
|||
| PFC-MMC-74 (Inactive) - General Process Instruction for Laminates Thermosetting Composites |
STP-7501
|
|||
| PFC-MMC-73 - Fabrication of (350 deg. F Cure) Graphite/Epoxy Composite Laminates |
STP-7521
|
|||
| PFC-MMC-71 - Trimming, Drilling and Assembly of Graphite Composite Structures |
STP-7532
|
|||
| PFC-MMC-71 |
STP-7533
|
|||
| PFC-MMC-70 - Sealing of Composite Structures |
STP-7534
|
|||
| PPS-C103-7021 - PTI Technologies |
STP-5008
|
|||
| QCC-060 - PTI Technologies | ||||
| PFC-MMC-091 - NDI - Ultrasonic Inspection For Advanced Composites |
STP-7535
|
|||
|
|
||||
| Bell Helicopter | Bonded Structures, Contoured, Hi Temp. also includes BPS's 4408,4448, and 4449. |
BPS4328
Code AC
|
||
| Bonded Structures, Flat, Hi Temp. also includes BPS's 4408,4448, and 4449. |
BPS4328
Code AE
|
|||
| Bonded
Blades, Rotor BPS4328 Code AF Bonding , Low Density insert Material with Honeycomb Sandwich Construction (Also BPS 4383) |
BPS4383
Code AR
|
|||
| Bonding Reinforced Plastic Structures |
BPS4364
Code AA
|
|||
| Bonded Reinforced Fiberglass Structures |
BPS4366
Code AI
|
|||
| Bonding, Low Density Insert Material with Honeycomb Sandwich Construction |
BPS4383
Code AR
|
|||
| Bonded structures, Contoured, Low Temp. also includes BPS 4437 and 4458 |
BPS4423
Code AB
|
|||
| Bonded Structures, Contoured, Hi Temp. also includes BPS's 4437 and 4458. |
BPS4423
Code AD
|
|||
| Bonding, Splicing honeycomb cores and installing inserts |
BPS4425
Code AS
|
|||
| Bonding Polycarbonates |
BPS4434
Code AU
|
|||
| Bonded Reinforced Fiberglass Structures |
BPS4437
Code AJ
|
|||
| Plastics Compression molded |
BPS4469
Code EE
|
|||
| Plastics, Compression molded products |
BPS4469
Code EI
|
|||
| Upholstery and Fabrics (Complex) |
BPS4469
Code FA
|
|||
| Upholstery and Fabrics (Simple) |
BPS4469
Code FB
|
|||
| Machining (Details, Small) |
BPS4469
Code MD
|
|||
| Handling & Usage of Fire Extinguishant Powder |
BPS4510,
Code AV1
|
|||
| Plastics, Vacuum Molded |
BPS4510,
Code EC1
|
|||
| Bonding, Composite Structures (Also BPS 4518) |
BPS4511
Code AM2
|
|||
| Processing Specification for 250 F. Degree to 325 F. Degree Cure Laminate Composite Structures |
BPS4512
Code AM1
|
|||
| Plastics vacuum molded |
BPS4546
Code EC2
|
|||
| Section II, Method II - Sulfuric/Sodium Dichromate Etch |
BPS4352 Code PH1D |
|||
| Section V, Method III - Bisulfate Etch |
BPS4352,
Code PH4C
|
|||
| Boeing | D1-9000 BQS for Suppliers approved to both D1-9000 & D1-4426 |
9000
BQS-Quality System
|
||
| D1-9000, Rev. A |
D1-9000
BQS & AQS
|
|||
| Fiber Reinforced Composite Parts (728) |
BAC
5317
|
|||
| Carbon and Aramid Reinforced Composite Parts, 350F Cure (729) |
BAC
5317-1
|
|||
| Mfg High Temp. Resistant Epoxy Str. Parts (730) |
BAC
5317-3
|
|||
| Mfg. Adv. Composite Structural Parts, 250F cure |
BAC
5317-5
|
|||
| Mfg. Low Temp. Autoclave Cure Epoxy Str. Parts (734) |
BAC
5317-2
|
|||
| Approval for OSU Testing per BSS 7322 Only (740) |
BAC
5524
|
|||
| Approval for OSU Testing per BSS 7322 & Smoke Test BSS 7238 (744) |
BAC
5565
|
|||
| Approval for OSU Testing per BSS 7322 Level II Parts Only (748) |
BAC
5331
|
|||
| ASTM-E-8 Mechanical Testing (Non Metalics Only) (802) |
ASTM-E-8
|
|||
| Laminate Fabrication - Plastic (S719) |
PS
14034
|
|||
| Laminate Fabrication - Nonstructural Plastic (S720) |
PS14034.1
|
|||
| Fabrication Duct Assy |
PS14057
|
|||
| Laminate Fabrication - Silicone Rubber & Plastic |
PS14059
|
|||
| Application of Interior Decorative Finishes |
BAC5755
|
|||
| Cessna | CSAC (Critical Parts) - Spec Deviation Approval |
Spec
Deviation Approval
|
||
| Fairchild Dornier | Quality System to Federal Aviation Regulation, Part 21, Subpart G |
FAR,
Part 21, Subpt G
|
||
| Sikorsky | Composite Test |
Composite
Test (Lab 9)
|
||
| Adh. Bonded Composite Sandwich Panels |
SS
9220 Rev. 4, 01
|
|||
| Adhesive Bonding |
SS8669
Rev. 17
|
|||
| Bombardier | Class "A" Supplier for Composite/Fiber Reinforced Plastics | |||
|
||||
 |
Approved
Processes |
|
|
Equipment
& Materials Listing |
|
|
Personnel
& Contact Info |